• Sourcing Solutions
  • Services & Membership
  • Help & Community

Quick Details

  • Place of Origin: Zhejiang, China (Mainland)
  • Classification: Other Adhesives
  • Main Raw Material: Polyurethane
  • Usage: Transportation
  • Brand Name: JOIN LEADER
  • Model Number: JOINFLEX 126
  • color: black, white, grey

Packaging & Delivery

Packaging Details 310ml cartridge; 400ml & 600ml sausage.
Delivery Time 30 days


1. Single part
2. High performance
3. Used in gap sealing and construction

JOINFLEX 126 Construction PU Sealant



JOINFLEX 126 Construction PU Sealant is single part polyurethane based, high/middle modulus sealant, which cures on exposure to atmospheric moisture to form elastomeric mastic.

JOINFLEX 126 Construction PU Sealant has excellent adhesion on all cement based materials, brick ceramics, polyurethane, epoxy, most polyesters, most metals and most timbers.

JOINFLEX 126 Construction PU Sealant is suitable for bonding or sealing joints between most construction materials, where a high bond strength is required.



Non-corrosion to substrates;
Thixotropic ,no sag.

Little Volatile Odor

Excellent adhesion on glass and metal surface

Good weathering resistance.

Can be painted over with many water, solvent and rubber based paints (preliminary tests recommended).

Conforms to the most stringent sealant standards



As Supplied – tested at 23°C±2°C, RH50%±5%:

Item                                                       Data                    

Aspect:                           Thixotropic Paste

Gravity, g/cm3                        1.4

Tack Free Time, min.                   30~60

Extrudability, ml/min.                   ≥80

Sag/Slump, mm                       ≤1                       

Curing depth, mm/24hr                3

Service Temp, °C                      -50 ~+90 (continuous)

                                      +120 short time (up to 8 hrs)

Application Temp, °C                  +5~+45


As Cured – tested at 23°C±2°C, RH50%±5%

Hardness, 24H, Shore A           ≥25                

Hardness, 7d, Shore A           ≥40              

Depth of curing, 24H, mm           ≥3                    

Depth of curing, 7d, mm          ≥6                      

Recovery of elastic, %             ≥85                  

Shrinkage                         ≤5                    

Tensile modulus(MAX), MPa       ≥1.5                

Modulus at 100% elongation, MPa   ≥0.7                

Peel strength, N/mm               ≥10                

Shear strength, MPa               ≥1.5

Elongation at break, %             ≥500                

Solid content, %                   ≥95                            

Resistance to dilute acids and bases General

Water and salt spray resistance       Good

Compatibility with paints            Yes                          




JOINFLEX 126 Construction PU Sealant is used for bonding or sealing joints between most construction materials, where high or middle bond strength is required.

Trafficable floor joints

Assembly of metal framed buildings

Cover plates and covings

Bolted lap joints

Prisons, gaols, grand stands



JOINFLEX 126 Construction PU Sealant is not suitable for adapting to structural fitting and following situations:

1. To all surfaces that bleed oil, organic acid, alkali, plasticizers or solvents such as wood immersed in oil, oil crack filler, and some uncured or sulfurized fat and to surface where is wet;

2. To the substrate that the surface temperature exceeds +45°C or apply at temperatures below +5°C;

3. Use in the manufacturer of IG units;

4. To the surfaces that with direct touch of food.

5. Not recommended for use in below ground joints or trafficable

6. Joints where abrasion and physical abuse are encountered.

7. Not recommended for none of both surfaces is porous.

8. Avoid exposure to high level of chlorine.

9. Avoid contact with alcohol and other solvent cleaners during cure.

10. Do not apply when a moisture vapour transmission condition exists at time of application, as this can cause bubbling within the sealant




Cleanse with a cleaning agent, to keep the substrate surfaces completely clean(JOIN LEADER also provide the cleaning agent for your convenience).

Use the sealant after cleaning agent dries, around 1~2mins later. You can use two different cloth, one for cleaning agent, and the other for sealant. (Notice that the two can’t be mixed use together, and the second cloth will be better purified cotton and no picking.)

For better appearance, cover outside of joint areas with masking taps before application.

Cut nozzle to desired size and extrude sealant to joint areas.

Tool immediately after sealant application, make it smooth and remove masking tape before sealant skins.



12 months in unopened packaging in a cool and dry storage place at temperatures between +5°C and 25°C.



Grey, black and white.

Also we can produce the sealant with special color upon customers' requirement.



Cartridge: 280ml, 300ml

Sausage: 400ml, 600ml

Transaction History of the Supplier

Below is the information about the supplier's transactions conducted via Alibaba.com. If you require further details regarding the transaction data, please contact the supplier directly.

Transaction Overview


Transaction Details

This supplier has completedtransactions with buyers from .

Shipping Destination
Transaction Value
Transaction Date
Email to this supplier
China (Mainland) | Manufacturer, Trading Company
Transaction Level:
Supplier Assessments:
The supplier supports Trade Assurance – A free service that protects your orders from payment to delivery.
Supplier's Trade Assurance Limit: US $48,000
Learn More